אזהרה: החומר דליק ורעיל. יש להמנע משאיפת אדי החומר, להקפיד על איוורור נאות ולהרחיק מחום. יש להרחיק מילדים. 

MRP-377 Camouflage Beige (hemp) BS389
Light Blue for SU-27 and others in form of an "Ink" for perfect atomization and spray jet, featuring excellent drying time and very good coverage, all at the same time.
MR.PAINT is an acrylic colour designed for spraying with your airbrush. The colour is pre-thinned in preparation for immediate use.

אזהרה: החומר דליק ורעיל. יש להימנע משאיפת אדי החומר ולהשתמש במסכה, להקפיד על אוורור נאות ולהרחיק מחום.
יש להרחיק מילדים. 
לכה לאקר מבריקה

A-STAND Klear Kote Varnishes Glossy
A-Stand Klear Kote varnishes offer extremely durable matt, satin and gloss finishes. Of course, they can be mixed together to obtain all types of intermediate finishes.
Why to use A-Stand?
The excellent fluidity of A-Stand products makes them easy to spray without clogging the airbrush. They also provide a tough and durable finish once dry, allowing the application of any other lacquer, enamel weathering products, or acrylic paint on top without issue. In addition, modelling masking tape can be applied over the hard finish of the A-Stand paints with no problem.
A-Stand products dry to the touch in a short period of time of approximately 30 minutes, depending on the amount of paint applied, ambient humidity and temperature. Allow 1 hour of drying time before the applying other products safely, they will completely cure in 24 hours. The thinner used in these paints and varnishes, like in other lacquer products, are only suitable for airbrush use, not for brush painting.
Remember that all lacquer paints contain toxic components and it is advisable to use a mask for its application, and to spray these products in a well-ventilated area.

Used for painting US aircraft interiors since the autumn of 1943 until the 1950s.
One of the colors used for painting US Army vehicles in the Summer Verdant variant of MERDC scheme.
A fair match to one of the colors available for painting disruptive camouflage on US Army vehicles during the World War II (as No.1 Light Green).

]]> https://hobbytech.co.il/product/light-gull-grey-fs-16440-2/?utm_source=rss&utm_medium=rss&utm_campaign=light-gull-grey-fs-16440-2 Sun, 31 May 2026 04:58:18 +0000 https://hobbytech.co.il/?post_type=product&p=65069 אפור שחף בהיר]]> Light Gull Grey FS 16440 RC889
צבע אפור שחף בהיר
תואם FS16440
מק"ט ישן RC220
צבע לאקר איכותי, בעל כושר אחיזה גבוה, מתייבש למרקם חלק.
ניתן לדלל באמצעות מדלל ייעודי או מדלל אחר לצבעי לאקר

Used for painting upper surfaces of US Navy carrier-based aircraft from 1955 until the early 1980s.
From February 1977 until 1980-1981 gradually applied as overall color of carrier-based fighters (F-14 Tomcat & F-4 Phantom II).
Lower surface color of USMC AV-8B Harrier II aircraft finished in the Land Camouflage Scheme used from 1985 until the late 1980s.
One of the colors used in the so-called Ferris Scheme evaluated by the US Navy in 1976.
Lower surface color of US Navy SH-3 Sea King helicopters from 1971 until the 1980s.
Overall color of USMC CH-53D helicopter from 2008 to 2012.
A fair equivalent of M-485 Light Grey used as overall color of US Navy & USMC carrier-based aircraft from the end of December 1940. From mid-October 1941 until January 1943 used as the undersurface colour of US Navy & USMC carrier-based aircraft finished in the Blue Grey/Light Grey scheme which was also ordered for all their shore-based aircraft in February 1942.

This versatile reamer-punch is designed to create and enlarge holes in polystyrene, polycarbonate, and other plastics or soft materials. Easy to use and versatile, this punch allows you to open and expand holes of various diameters using a single tool. Perfect for detal work, scratchbuilding, and conversions of scale models and miniatures.

Features:
Overall length: 130 mm (5.1 in)
Width: 18 mm (0.7 in)
Tool length: 83 mm (3.3 in)
Threaded aluminum cap to protect the tool tip
Hollow handle, lightweight and ergonomic for comfortable use during long sessions
Capacity: 0–14 mm (0–0.55 in)
High-strength stainless steel

• ATOM-20163 ATOM COLOR Matt Black
• ATOM-20004 ATOM COLOR Wood
• ATOM-20048 ATOM COLOR Clay Brown
• ATOM-20123 ATOM COLOR Cold Gray
• ATOM-20077 ATOM COLOR Dunkelgrün RLM81
• ATOM-20134 ATOM COLOR Blue Gray

Aggressor squadrons are specialized units within the United States Air Force (USAF) that simulate enemy tactics, techniques, and procedures to provide realistic air combat training. These squadrons use surrogate aircraft to emulate potential adversaries, helping pilots prepare for real-world engagements.

This set contains six high-quality acrylic paints specially designed for painting the most common camouflage schemes used today by the USAF Aggressor squadrons (65th Sqn and 64th Sqn), including the colors used on the F-15C and F-16C, which simulate the desert and arctic tones that camouflage Russian and ex-Soviet aircraft. This set makes it easy to choose the correct colors for your models, helping you work faster with the best results.

ATOM paints have a water-based formula that offers all the advantages of lacquer and is optimized for maximum performance with both brush and airbrush. The features of this paint include self-levelling capability, fast drying time, and exceptional covering power which makes them unique to the market. Additionally, they are extremely durable, allowing for the use of acrylics, lacquers, enamels, or more aggressive products such as decal solutions once dry. They come in a new transparent 20 ml bottle with a convenient vertical dropper cap that can be opened and closed with one hand. This paint is odorless and environmentally friendly. It can be applied directly from the bottle or thinned with ATOM Thinner and Cleaner