Set of Silicone Containment Moulds that allow you to limit the edges of the bases of your miniatures when pouring liquids and resins, such as our Ultraviolet Resin (LINK). Resin will not stick to the silicone nor will it affect the transparency of the resins.

These moulds have the standard measurements of wargame bases. During the filling with resins, to reduce any potential deformities due to the high temperatures generated, we recommend the application of the resin in thin layers. Do not move or manipulate these moulds with resin inside until they have been completely hardened, since air may have trapped inside, releasing it and generating internal bubbles.

These moulds are heat resistant up to 240ºC and very durable.

Dimensions:

20mm
25mm
40mm
50mm
25x50mm

Height: 10mm

Blue Stuff sticks is a new generation of thermoplastic molding material that can be reduced to mouldable conditions by immersion in hot water for 3 minutes.

It will allow you to create an instant mold of any piece you wanted by pressing the plastic material against the piece you want to have the mold made from. After that, make copies by using any kind of putty, polyester resins or even epoxy resins. Nothing will get stuck. REUSABLE plastic moulding for all levels.

A new improved formulation will allow you to have better details since the plastic will remain more time in a soft state.

This set contains 4 bars and it will last forever.

Dimension of each bar: 5.8×1.5×0.7cm
Weight of each bar: 6 gr

Column mold
made of high-quality food-grade semitransparent silicone, which allows the creation of both complete columns and column fragments. It includes different pieces of pillars in different architectural styles: Doric, Ionic, and Solomonic, or even combinations of all of them. Valid for both realistic modeling or hobby creations, as well as architecture. Scale approximately 1:48 (wargames) to 1:35.These molds are resistant to heat, up to 240ºC, and very durable. The molds work very well with any type of resin, although for a longer useful life we ​​recommend the use of acrylic resin Wait until the material has fully cured before removing the parts. Other materials such as milliput, milliput mixed with plasteline, magic sculpt and others also work but are more difficult to use. We recommend the use of scrapers to remove excess putty/clay from the molds without damaging them.