Super Gloss Finish 1K is a high gloss monolayer varnish specially designed for model kits that does not yellow or damage decals.
1K varnishes are characterized by their fast drying and high gloss, since their evaporation process is very fast, which allows complete drying on the surface of the model at room temperature between 30 minutes and one hour.
Its use is very simple and can be applied over any paint: acrylic, lacquer or solvent based.

Cobra Motor Clear Lacquer 2K A.MIG-2261
The Cobra Motor colour range are non-toxic paints, perfect for painting any area of your vehicles including bodies, rims, tires, engines and interiors. They can be very easily applied both with brush and airbrush, and have great covering power and an extremely smooth and uniform matt finish.
To achieve the distinctive gloss finish on the vehicles’ bodies, we have formulated a special lacquer to be used with the associated catalyst and thinner. Cobra Motor lacquer provides the same glossy finish as real vehicles. This is a toxic product, so we recommend using a paint mask during application.
Application tips for 2K Cobra Motor Lacquer:
-To achieve the gloss of real car bodies use 2K Cobra Motor Lacquer. It is a two component epoxy lacquer, a special airbrush version of the polishing lacquers used on real cars, so it is applied in the same way and gets the same gloss as real cars. Mix 2 parts of lacquer with 1 part of Hardener, if you want to apply more fluid coats you can add the desired amount of 2K Lacquer Thinner and Cleaner.
-Clean the paint area from dust before applying the lacquer. You can spray a little water with the airbrush to remove suspended dust particles.
-Hold the model with a support on the inside, so that you never touch it with your fingers, as this can create craters or imperfections in the lacquer. Use gloves that are completely clean of talcum powder and dirt.
-Unlike the Cobra Motor paints, the lacquer is toxic. Use a mask.
-Spray a thin coat of lacquer first, let it dry for 2 minutes and then apply the thicker coat at low pressure, approximately 1 bar-14 psi, to leave a completely wet coat, but do not overdo it so that it does not drip.
-Try to apply the lacquer coat in one continuous pass, starting on one side of the model and finishing on the other.
-Clean the airbrush with 2K Lacquer Thinner and Cleaner.
-Allow to dry for 24-48 hours under a clean cover to prevent dust from settling on it.
-If any dust particles have fallen into the lacquer, or if it has been scratched during handling, it can be polished in exactly the same way as on real cars. We recommend Mr. Hobby's Mr. Compound Coarse, Fine and Superfine polishes.

Cobra Motor Clear Lacquer 2K A.MIG-2261
The Cobra Motor colour range are non-toxic paints, perfect for painting any area of your vehicles including bodies, rims, tires, engines and interiors. They can be very easily applied both with brush and airbrush, and have great covering power and an extremely smooth and uniform matt finish.
To achieve the distinctive gloss finish on the vehicles’ bodies, we have formulated a special lacquer to be used with the associated catalyst and thinner. Cobra Motor lacquer provides the same glossy finish as real vehicles. This is a toxic product, so we recommend using a paint mask during application.
Application tips for 2K Cobra Motor Lacquer:
-To achieve the gloss of real car bodies use 2K Cobra Motor Lacquer. It is a two component epoxy lacquer, a special airbrush version of the polishing lacquers used on real cars, so it is applied in the same way and gets the same gloss as real cars. Mix 2 parts of lacquer with 1 part of Hardener, if you want to apply more fluid coats you can add the desired amount of 2K Lacquer Thinner and Cleaner.
-Clean the paint area from dust before applying the lacquer. You can spray a little water with the airbrush to remove suspended dust particles.
-Hold the model with a support on the inside, so that you never touch it with your fingers, as this can create craters or imperfections in the lacquer. Use gloves that are completely clean of talcum powder and dirt.
-Unlike the Cobra Motor paints, the lacquer is toxic. Use a mask.
-Spray a thin coat of lacquer first, let it dry for 2 minutes and then apply the thicker coat at low pressure, approximately 1 bar-14 psi, to leave a completely wet coat, but do not overdo it so that it does not drip.
-Try to apply the lacquer coat in one continuous pass, starting on one side of the model and finishing on the other.
-Clean the airbrush with 2K Lacquer Thinner and Cleaner.
-Allow to dry for 24-48 hours under a clean cover to prevent dust from settling on it.
-If any dust particles have fallen into the lacquer, or if it has been scratched during handling, it can be polished in exactly the same way as on real cars. We recommend Mr. Hobby's Mr. Compound Coarse, Fine and Superfine polishes.

אזהרה: החומר דליק ורעיל. יש להימנע משאיפת אדי החומר ולהשתמש במסכה, להקפיד על אוורור נאות ולהרחיק מחום.
יש להרחיק מילדים. 

A-STAND Aqua Gloss Acrylic Varnish
The A-Stand range also includes the Aqua Gloss acrylic varnish, ideal for protecting all types of paint before applying decals or enamel and acrylic weathering products. It dries very quickly, after 1 hour you will be able to work safely over the application, however maximum resistance is achieved after 24 hours. This varnish can be diluted with water.
Why to use A-Stand?
The excellent fluidity of A-Stand products makes them easy to spray without clogging the airbrush. They also provide a tough and durable finish once dry, allowing the application of any other lacquer, enamel weathering products, or acrylic paint on top without issue. In addition, modelling masking tape can be applied over the hard finish of the A-Stand paints with no problem.
A-Stand products dry to the touch in a short period of time of approximately 30 minutes, depending on the amount of paint applied, ambient humidity and temperature. Allow 1 hour of drying time before the applying other products safely, they will completely cure in 24 hours. The thinner used in these paints and varnishes, like in other lacquer products, are only suitable for airbrush use, not for brush painting.
Remember that all lacquer paints contain toxic components and it is advisable to use a mask for its application, and to spray these products in a well-ventilated area.
The A-Stand paint series includes various lines of products used to apply a range of effects and finishes on your models.
Always clean and dilute with A-Stand Airbrush Thinner & Cleaner A.MIG-2013

AV PREMIUM
Premium is a range of acrylic colors specifically designed for airbrushing and for optimum adherence on surfaces such as fiberglass, polyethylene, polycarbonate, metal and Lexan. Premium has been formulated with permanent pigments and a new, extremely resistant hybrid resin of acrylic-polyurethane. The Premium range contains matt and opaque, transparent, metallic, and fluorescent colors, and includes the specific varnishes and auxiliary products of the product line. Premium is especially recommended for painting motorcycle helmets, fuel tanks, surfboards and similar surfaces exposed to hard wear, and resists impacts and cracking as well as direct exposure to heat. The Premium colors resist fuel residue proof (as used in RC) ofup to at least 35% Nitro. It is recommended to apply Premium in successive layers on previously primed surfaces. A few hours after application, the Premium colors will form a homogenous film of extraordinary strength and resistance. The recommended compressor settings are around 15-20 PSI, o 0.5 to 1 kg. For a final, especially resistant protection, a final (2K) urethane varnish is recommended (applied by aerosol or airbrush). Painting tools can be cleaned with water.
Safety: Premium Color is not flammable, and does not contain solvents. Please see also certified safety information of the product on the Safety sheet.

AV PREMIUM
Premium is a range of acrylic colors specifically designed for airbrushing and for optimum adherence on surfaces such as fiberglass, polyethylene, polycarbonate, metal and Lexan. Premium has been formulated with permanent pigments and a new, extremely resistant hybrid resin of acrylic-polyurethane. The Premium range contains matt and opaque, transparent, metallic, and fluorescent colors, and includes the specific varnishes and auxiliary products of the product line. Premium is especially recommended for painting motorcycle helmets, fuel tanks, surfboards and similar surfaces exposed to hard wear, and resists impacts and cracking as well as direct exposure to heat. The Premium colors resist fuel residue proof (as used in RC) ofup to at least 35% Nitro. It is recommended to apply Premium in successive layers on previously primed surfaces. A few hours after application, the Premium colors will form a homogenous film of extraordinary strength and resistance. The recommended compressor settings are around 15-20 PSI, o 0.5 to 1 kg. For a final, especially resistant protection, a final (2K) urethane varnish is recommended (applied by aerosol or airbrush). Painting tools can be cleaned with water.
Safety: Premium Color is not flammable and does not contain solvents. Please see also certified safety information of the product on the Safety sheet.