חומרי עזר מומלצים
מדלל לצביעה באיירבראש: (Vallejo)  (AMIG )
נוזל ניקוי לאיירבראש:   (Vallejo)  (AMIG )

A-STAND Metallic colours
Using the extensive range of A-Stand metallic colours, you can paint any metallic finish on your models including copper, brass, gold, chrome and different shades of burnt metal. These metal colours are extremely tough and won´t be affected by any product or paint, and their very fine pigment creates a completely smooth finish.
Why to use A-Stand?
The excellent fluidity of A-Stand products makes them easy to spray without clogging the airbrush. They also provide a tough and durable finish once dry, allowing the application of any other lacquer, enamel weathering products, or acrylic paint on top without issue. In addition, modelling masking tape can be applied over the hard finish of the A-Stand paints with no problem.
A-Stand products dry to the touch in a short period of time of approximately 30 minutes, depending on the amount of paint applied, ambient humidity and temperature. Allow 1 hour of drying time before the applying other products safely, they will completely cure in 24 hours. The thinner used in these paints and varnishes, like in other lacquer products, are only suitable for airbrush use, not for brush painting.
Remember that all lacquer paints contain toxic components and it is advisable to use a respirator for its application, and to spray these products in a well-ventilated area.

A-STAND Metallic colours
Using the extensive range of A-Stand metallic colours, you can paint any metallic finish on your models including copper, brass, gold, chrome and different shades of burnt metal. These metal colours are extremely tough and won´t be affected by any product or paint, and their very fine pigment creates a completely smooth finish.
Why to use A-Stand?
The excellent fluidity of A-Stand products makes them easy to spray without clogging the airbrush. They also provide a tough and durable finish once dry, allowing the application of any other lacquer, enamel weathering products, or acrylic paint on top without issue. In addition, modelling masking tape can be applied over the hard finish of the A-Stand paints with no problem.
A-Stand products dry to the touch in a short period of time of approximately 30 minutes, depending on the amount of paint applied, ambient humidity and temperature. Allow 1 hour of drying time before the applying other products safely, they will completely cure in 24 hours. The thinner used in these paints and varnishes, like in other lacquer products, are only suitable for airbrush use, not for brush painting.
Remember that all lacquer paints contain toxic components and it is advisable to use a respirator for its application, and to spray these products in a well-ventilated area.

חומרי עזר מומלצים
מדלל לצביעה באיירבראש: (Vallejo)  (AMIG )
נוזל ניקוי לאיירבראש:   (Vallejo)  (AMIG )

חומרי עזר מומלצים
מדלל לצביעה באיירבראש: (Vallejo)  (AMIG )
נוזל ניקוי לאיירבראש:   (Vallejo)  (AMIG )

Alclad Black Microfiller
High quality black microfiller and primer. This is the recommended microfiller used before applying high shine metallic paints to ensure proper surface preparation.
This color is airbrush ready, no thinning necessary. Spray at 12-15psi and from a distance of 2-3 inches from the surface in light misted coats. The surfaces to be painted must be thoroughly clean and free from dust, grease, oil and finger prints. Avoid prolonged breathing of vapors and ensure adequate ventilation. Apply a primer before use. Primers should be lightly polished with 1000/1200 wet & dry paper to give a less absorbent smooth surface. Clean airbrush with A.MIG-8200 (307 Lacquer thinner and cleaner).
This is the recommended priming product used before applying high shine metallic paints. Primer manufactured by Alclad II according its original formulation and now distributed by AMMO of Mig Jimenez as well.